Descripción
Aeroshell 120
AeroShell Oils are available in four different viscosity grades:
AeroShell Oil 65 – AeroShell Oil 80 – AeroShell Oil 100 – AeroShell Oil 120
The suffix for each grade corresponds to the viscosity of the oil at 210°F in Saybolt Universal Seconds.
The appropriate grades of these AeroShell Oils are approved for use in four-stroke (four- cycle) certified aircraft reciprocating piston engines (except Porsche) and other aircraft radial engines which use oil to specification SAE J-1966 (MIL-L-6082) and which do not require use of an oil containing a dispersant additive. AeroShell Oils are used primarily during break-in of most new or recently overhauled four-stroke aviation piston engines. The duration and lubrication recommendations for break-in vary, so operators should refer to the original engine manufacturer and/or overhaul facility for specific recommendations.
Properties
- SAE viscosity grade: 60
- Density @ 15°C kg/l: 0.889
- Kinematic viscosity mm²/s:
@ 40°C: –
- Viscosity index: 94
- Pourpoint °C: -11
- Flashpoint Cleveland: Above 250
- Total acidity mgKOH/g: <0.1
- Sulphur %m: 0.51
- Copper corrosion @ 100°C: 1
- Ash content %m: 0.006
Specifications:
- U.S. J-1966 SAE Grade 60 – MIL-L-6082E.
- British –
- French –
- Russian –
- NATO Code –
- Joint Service Designation OM-370 Obsolete
Valoraciones
No hay valoraciones aún.